诚信熔接网厂

1. Tools:

主机、切割刀、光纤、剥线钳、酒精（99%工业酒精最好，用75%的医用酒精也可）、棉花（用面巾纸也可）、热缩套管

Host, cutting knife, fiber, stripping pliers, alcohol (99% industrial alcohol best, with 75% medical alcohol can), cotton (with tissues can), heat shrinkable sleeve

2、放电实验：

2. Discharge experiment:

目的： 让光纤熔接机适应当前的环境

Objective: to adapt the fiber optic adapter to the current environment

为什么做： 更好的适应环境，放电更充分，熔接效果更好

Why to do it: better adapt to the environment, more fully discharge, better weld effect

怎么做： （1）、加入光纤，选择“放电实验”功能。屏幕显示出放电强度，直到出现“放电OK“为止。

How to do: (1), add fiber, choose the "discharge experiment" function. The screen displays the discharge strength until the "discharge OK" appears.

（2）、空放电，按ARC键

(2), air discharge, according to ARC key

做多少次： 过程会出现“放电过强，放电过弱“，直到放电OK止

How many times do you do it: the process will be "too strong, too weak" until the discharge OK stops.

什么时候做：（1）、位置改变时（一般超过300KM）

When to do it: (1), when the position is changed (generally more than 300KM)

（2）、海拔变化时（一般超过1000m）

(2), when the altitude is changed (generally more than 1000m)

（3）、在更换电极后一定需要做放电实验

(3) the discharge experiment must be done after replacing the electrode

（4）、纬度变化时

(4), latitudinal change